Glazing Shovel (Blue Shock Proof Plastic)

Bohle Premium Glazing Tool  |  Model BO5165301  |  OGS SKU GT-2030

Professional Glazing Shovel for Controlled Glass Positioning

The Bohle BO5165301 Premium Glazing Shovel is a purpose-built lever tool for the professional blocking and positioning of glazing units. Made entirely from impact-resistant plastic, it provides a sturdy, surface-conscious alternative to using a metal pry bar when a glass unit needs to be raised slightly, aligned or supported while setting blocks and glazing packers are positioned.

A Practical Tool for Glazing Adjustment

During window and door glazing, an insulating glass unit may need to be lifted or shifted by a small amount so it can be centred, squared and properly supported. The shovel's broad working end distributes leverage across a wider area, while its all-plastic construction helps avoid direct metal-on-glass contact.

• Position glazing units: Apply controlled leverage when adjusting glass within a sash, door or frame.
• Assist with toe-and-heeling: Raise the glass slightly while glazing blocks or packers are inserted and repositioned.
• Support professional blocking: Fine-tune the placement of setting blocks beneath an insulating glass unit.
• Handle sensitive materials: Use as a manual lever wherever a sturdy, non-metallic tool is preferred for careful positioning work.

Recommended Method of Use

1. Inspect and clean: Check the shovel for damage and remove any dirt, glass fragments or abrasive debris from the tool and work area.
2. Position the working end: Carefully place the broad end beneath the appropriate edge of the glazing unit, setting block or packer.
3. Apply controlled leverage: Press the handle gradually to lift or shift the unit only as much as required. Avoid sudden, excessive or twisting force.
4. Support and verify: Insert or reposition the required blocks, release pressure gradually and confirm that the glass is properly supported, aligned and secure.

Technical Specifications

Important Use Guidance

This is a manual positioning and blocking tool, not a load-rated glass-lifting device. Do not rely on the shovel as the sole support for a glazing unit. Use appropriate glass-handling equipment, safe lifting practices and suitable personal protective equipment. Never work with cracked or chipped glass, and discontinue use if the shovel is damaged.