Canadian Dollars
US Dollar
Mexican Peso
Euro
British Pound
Australian Dollar
Glazing Tools
Shop glazing tools online to find top quality glass tools made for glaziers. Featuring products from reliable brands like EDTM, Bohle, Ultrawiz, KDS, and more.
Sub Categories
Sold Out
EDTM
GC3200 Glass-Chek ELITE Glass Thickness Meter & Low-E Detector
$2,450.00
Glass Chek Pro 3001
Glass Chek Elite 3200
Glass Thickness Features
Laminated Glass Identification
check_blue
Measure PVB Thickness of Laminated Glass
...
Sold Out
EDTM
Glass-Chek PRO Glass Thickness Meter & Low-E Detector (Model # GC3001)
$2,150.00
With one push of a button, the
Glass-Chek PRO tells you the exact replacement IG unit to order! The Glass-Chek PRO is suited perfectly for
glass replacement, but it's perfect for many other applications as well. Whether you're installing...
EDTM
ETEKT+ Low E Coating Detector (Model # AE1601)
$295.00
The ETEKT + has been serving an
important role for glaziers worldwide for nearly 20 years: locate invisible Low-E coatings on IG units with a
definitive, non-destructive test. With the release of the AE1601 (second generation ETEKT+),...
Sold Out
EDTM
Digital BTU/Watt Solar Power Meter (Model # SP1065)
$190.00
The SP1065 can now switch between two units of measure: BTU/hr*ft^2 and Watts/M². Switching between modes is easily accomplished by using the buttons on the new embossed style power switch that also provides a smooth front surface and a sleeker...
EDTM
Strengthened & Tempered Glass Detector (Model # SG2700)
$495.00
Confirm if your single or double pane glass has been strengthened. Strengthened glass can include Heat Strengthened Glass, Tempered Glass and Safety Glass. It is also sometimes referred to as "Toughened Glass."• Test single or multiple...
EDTM
Commercial Tin Side Detector (Model #TS1320)
$270.00
The Commercial Tin Side Detector (Model # TS1320) incorporates several new features requested by users of previous tin side detector models.The lamp is more durable and energy efficient with more definitive test results than previous models. It also...
EDTM
Digital Tin Side Detector (Model #TS2300)
$340.00
The new digital Tin Side Detector offers a new technology for identifying the tin surface of float glass. This new detector boasts a number of advantages over traditional bulb-style detectors:• By placing the meter on both sides of the glass, the...
Sold Out
Bohle
L Square With Angle Brace
$95.00 - $180.00
These L-squares are manufactured from a single piece of metal with a brace to ensure optimal precision during use.
A. Richards
Pry Bar (US-10) Red
$10.00
10" Pry Bar Scraper
Made of high carbon tempered steel
0.1" thick
Combination tool features one chisel end, one bent end and a nail-puller
A. Richards
Pry Bar, Black 9 1/2"
$16.00
The black model #456 pry bar is a 10" high strength heat treated tool made of high-carbon tempered steel. It is ideal for a multitude of scraping and prying applications. The versatility of both ends makes it a great option for installing or...
Push Rubber Roll In Tool (Standard)
$19.00
This product features a cast aluminum shaft with a 1.5” nylon roller. Used for installing push rubber between the glass and frame. This product also features a narrow end piece that aids in installing the rubber through the tough and tight spots of...
Bohle
Glazing Shovel (Blue Shock Proof Plastic)
$17.00
This product is a great alternative to metal pry bars when used for lifting glass into position. It is made of shock-proof plastic and features an easy-grip handle.
Width: 2-15/16”
Length: 11”
Bohle
Glazing Shovel (Wood Handle)
$20.00
This Product is a great alternative to metal pry bars when used for lifting glass into position. It is made of shock-proof plastic and features a wooden handle.
Width: 2-5/8”
Length: 10-13/16”
Soft Face Hammer w. Hickory Handle
$25.00 - $30.00
This soft face hammer with nylon tips can be used against glass with out fear of scratching.
Length: 11.62”
Nylon Head Diameter: 1.34”
Available in 14 & 8 oz head sizes
A. Richards
Putty Chisel (1-1/4" Sharp Edge)
$9.00
This product features a full tang, heat treated, ground, mirror polished, & lacquer-sealed flexible taping knife blade which is hollow ground on both sides. The walnut handle is contour-cut and finished to fit comfortably in the hand. This putty...
Sold Out
A. Richards
Bent Putty Knife (1-1/4" Blade)
$9.00
This product features a full tang, heat treated, tempered, ground, mirror polished, & lacquer-sealed flexible taping knife blade that is hollow ground on both sides. The handle is made from polypropylene and is solvent-resistant. This bent putty...
Sold Out
Bohle
Lead Knife - Crescent Shape
$48.00
German made crescent shaped lead knife.
Blade length: 3-15/16”
Sold Out
Bohle
Hack-Out Knife
$29.00
German made hack-out knife with a plastic handle.
Width: 30mm
Blade Length: 3-47/64” (95mm)
NOTE: HANDLE NOW MADE OUT OF LEATHER INSTEAD OF PLASTIC.
Sold Out
UltraWiz
3055-K Ultrawiz UltraReach Cold Knife
$120.00
The UltraReach Cold Knife enables four different positions for maximum effectiveness and safety when cutting. While the 9-inch collapsed position is ideal for precision cutting, it expands to 12" in the fully extended position, allowing for extra reach...
UltraWiz
Long Knife, De-Glazing Tool
$65.00 - $70.00
At only 3/16" thick, UltraWiz® Utility Long Knives easily fit between the deepest dash and windshield. Unique blade holder does not require excessive tightening of the Phillips screw; just loosen the screw to remove the blade. A urethane handle...
UltraWiz
3001-K UltraWiz De-Glazing Knife Set
$68.75
Made from high-quality aluminum, this 4-3/4" knife is shaped to provide comfort and gripping power while preventing damage caused by rolling. . The handles is ergonomically shaped to provide comfort and gripping power. The unique setscrew design allows...
3178-RK UltraWiz Bolt, Bushing, and Pole Cable Kit
$19.00
Replacement Kit comes with Pull Cable, Bushing & Bolt
Replacement Kit for Pull Cable Knife #GT-2145
UltraWiz
UltraWiz De-Glazing Knife, Replacement Blades
$7.00 - $20.00
Original Cold Knife BladesMade from high-quality steel, the cold knife blades are put through a special coining process that thins the metal. They are then heat-treated to meet the UltraWiz® high standards. The engineers at UltraWiz® continually...
UltraWiz
UltraWiz De-Glazing Knife, Replacement Blades Ultrathin
$13.00 - $14.00
To meet the demand for thinner blades, UltraWiz® created the UltraThin Blade. They are 40% thinner than our Original Blade surpassing its strength and durability. A two-step coining process thins the cut length of the blade, which is then...
Sold Out
Rotary Deglazing Tool
$90.00
A favourite of glaziers worldwide, the rotary deglazing tool is a must have for exterior deglazing of glass panels that are embedded into flexible materials. Often used as replacement or complimentary tool for the exacto knife, the rotary deglazing tool...
Sold Out
Rotary Deglazing Tool - Replacement Blade
$45.00
The stamped replacement blade fits the Ontario Glazing Supplies Rotary Deglazing Tool (GT-1010) and is also compatible with CRL EZD Glazer Tool and TechnologyUK EZD Pipeknife. The replacement blade can be sharpened.
KDS
Utility Knife (L-23) Grip Fit
$12.00
Rubberized, non-slip grip cutter with twist lock slider.
Equipped with Power Black Blades, 2 spare blades are stored in the handle.
KDS
Utility Knife (H-13) Job Boss
$20.00
Heavy Duty knife with elastomer body.
Supplied with One Power Black H-Blade.
Screw type slider securely locks the blade in place.
KDS
L-23 Utility Knife Blades
$12.00 - $32.00
Replacement blades for L-23 utility knife. Blades are made of high-tempered steel and are double honed.
Thickness: 0.5mm
Available in packs of 10 and 50
KDS
H-13 Utility Knife Blades
$17.50
Replacement blades for H-13 utility knife. Blades are made of high-tempered steel and are double honed.
Thickness: 0.7mm
A. Richards
Ergo-Grip Razor Scraper (Retractable)
$295.00
This razor scraper is used for scraping and cleaning windows and various glass surfaces. The ergonomically designed rubberized contour maximizes grip and comfort. This product features a unique 3 position blade loading system that locks blades into place...
A. Richards
Razor Blade Scraper Handle
$250.00
Scrapes and cleans windows and various glass surfaces.
Sold Out
A. Richards
Razor Blade Scraper Handle (Right Angle, Plastic Handle)
$5.40
This razor blade scraper is used to trim wallcovering and other cutting projects.
Sold Out
Razor Blades - Single Edge (100 PK)
$9.00
Steel Back Single Edge Industrial Razor Blades
.009" - 0.012" Thickness
100 Blades per box
Made in the USA
Acrylic Sheet Scoring Tool
$5.00
Fast and easy way to scribe and break acrylic plastic sheets. Molded plastic handle, super-sharp steel blade. For Plexiglas®, acrylic and plastic.
Fletcher Acrylic Sheet Scoring Tool Replacement Blades
$12.50
Replacement blades for Fletcher acrylic sheet scoring tool.
Sold Out
Caulking Gun, Dripless
$20.00
Heavy-duty professional quality skeleton caulking gun with "no drip" feature, spout cutter, seal puncture and ladder hook for hanging when not in use.
1/10 gallon barrel holds most standard cartridges.
Use for medium to heavy applications of...
Sold Out
Sold Out
Glazier Tool Pouch (Leather)
$17.00
This glaziers tool pouch is made with real leather to hold up against your busiest work day.
Sold Out
A. Richards
Glazing Push Points (5oz pack, approx. 37pcs.)
$4.00
These push points can be installed using a putty knife, screw driver, or chisel and easily penetrate the sash. Available in 5 oz boxes (approximately 37pcs).
Fletcher Frame Master Points 3/8" (5000 pack)
Glazing point used to hold glass in place on wood sash.