Wood's Powr-Grip (N4000DGT) Deglazing Tool
- Wood's Powr-Grip
- Usually ships within 24 hours.
- Pad Model:
- Compound Type:
- Low-Marking, Natural Rubber
- Pad Diameter:
- 8" (20 cm)
- Load Capacity:
- 125 lbs (57 kg)
- Material Surface:
- Material Porosity:
The Wood's Powr-Grip N4000DGT Deglazing Tool with 8" N4000 ABS Vacuum Cup is engineered to simplify glass and mirror removal by providing leverage to facilitate the separation of windows from butyl taped glazing edges, and mirrors glued to walls.
Traditional interior glazed insulated glass unit (IGU) removal is often made easier when glaziers or service technicians have both interior and exterior access. Consequently, in this ideal setting one person is able to apply a pulling force to the interior of the IGU causing the initial separation of the the IGU from the glazing edge allowing the exterior worker to cut the butyl tape holding the IGU in place. However, in many situations exterior access is not available and often glaziers or service technicians work alone. The N4000DGT is designed to simplify the process whether working solo or with a crew by providing the power and control needed to remove glazed mirror and windows, reducing user fatigue and injury, and also helping to reduce damage to surrounding surfaces, such as vanity tops, bathroom fixtures, window sills, and walls.
The N4000DGT includes a Wood's Powr-Grip N4000 8" Vacuum Cup and comes equipped with a 1-3/4" x 4-1/4" (4.5 x 10.8 cm) low-marking, natural rubber pad, to spread exerted pressure over more than 7 sq. inches (47 sq. cm) of the surrounding material, preventing damage to most surfaces.
An interchangeable 18" (45 cm) low-marking, natural rubber pressure pad for additional wall support is available from Ontario Glazing Supplies, contact us to learn more.
|Allowable Surface Curvature||Flat|
|Maximum Elevation||5000' (1500 m)|
|Material Temperature Range||32° F - 100° F (0° C - 38° C)|
|Ambient Temperature Range||32° F - 100° F (0° C - 38° C)|
|Pressure Pad Dimensions||1-3/4" x 4-1/4" (4.5 x 10.8 cm)|
|Pry Bar Length||30" (76 cm)|
|Vacuum Cup Handle Type||Industrial-Grade Plastic|
|Vacuum Cup Plunger Type||Industrial-Grade Plastic|
For more information on the N4000DGT Deglazing Tool, consult the manufacturer instructions, troubleshooting, and specifications below. If you require any additional assistance in determining whether the N4000DGT is right for you, please contact us.
California Residents: Cancer and/or Reproductive Harm - California Proposition 65, read more here.
ANSI A4 (or higher) Cut Resistant Gloves are recommended when handling glass or other sharp materials.